板材測試項目Test items for panel

尺寸測量Dimension

ASTM D5947-18 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens固體塑料試樣物理尺寸的標準試驗方法

密度Density

ASTM D792-13 (Immersion Method) Method A、B Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement通過位移測定塑料的密度和比重（相對密度）的標準試驗方法

熱變形溫度Heat Deformation temperature

ASTM D648-18 Method A/B Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position邊緣位置彎曲載荷下塑料撓曲溫度的標準試驗方法

彎曲強度Flexural Strength 彎曲模量Flexural modulus

ASTM D790-17 Method A、B Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials非增強和增強塑料和電絕緣材料彎曲性能的標準試驗方法

穿孔剪切強度Shear Strength by Punch

ASTM D732-17 Standard Test Method for Shear Strength of Plastics by Punch Tool用沖壓工具測定塑料剪切強度的標準試驗方法

剝離強度Peel strength

ASTM D903-98(2017) Standard Test Method for Peel or Stripping Strength of Adhesive Bonds粘合劑剝離或剝離強度的標準試驗方法

拉伸強度Tensile strength

ASTM D638-14 Standard Test Method for Tensile Properties of Plastics塑料拉伸性能的標準試驗方法

屈服抗拉強度 Yield Tensile strength

ASTM D638-14 Standard Test Method for Tensile Properties of Plastics塑料拉伸性能的標準試驗方法

涂層測試項目 Test items for coating

漆膜厚度Coating thickness

ASTM D7091-13 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals應用于黑色金屬的非磁性涂層和應用于有色金屬的非磁性、非導電涂層的干膜厚度無損測量的標準規程

ISO 2360:2017 (渦流法) Non-conductive coatings on nonmagnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method非磁性導電賤金屬上的非導電涂層。涂層厚度的測量。幅度敏感渦流法

鏡面光澤度Specular gloss

ASTM D523-14(2018) Standard Test Method for Specular Gloss鏡面光澤的標準測試方法

ISO 2813:2014 Paints and varnishes - Determination of gloss value at 20°, 60° and 85°油漆和清漆 - 20°、60°和85°光澤值的測定

漆膜附著力(劃格法)Adhesion

ASTM D3359-17 Method A、B Standard Test Methods for Rating Adhesion by Tape Test通過膠帶測試評定附著力的標準測試方法

ISO 16276-2:2007 Corrosion protection of steel structures by protective paint systems — Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating — Part 2: Cross-cut testing and X-cut testing用防護漆系統對鋼結構進行腐蝕防護—涂層附著力/內聚力（斷裂強度）的評估和驗收標準—第 2 部分：橫切試驗和 X 切試驗

ISO 2409:2020 Paints and varnishes - Cross-cut test油漆和清漆 - 橫切試驗

鉛筆硬度Pencil hardness

ASTM D3363-20 Standard Test Method for Film Hardness by Pencil Test鉛筆測試薄膜硬度的標準測試方法

ISO 15184:2020 Paints and varnishes — Determination of film hardness by pencil test油漆和清漆 — 用鉛筆試驗測定漆膜硬度

柔韌性Flexibility test

ASTM D522/D522M-17 (Method A) Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings附著有機涂層心軸彎曲試驗的標準試驗方法

ASTM D4145-10(2018) (T bend) Standard Test Method for Coating Flexibility of Prepainted Sheet預涂板涂層柔韌性的標準試驗方法

杯突Cupping test

ISO 1520:2006 Paints and Varnishes - Cupping Test油漆和清漆 - 杯突測試

刮花Scratch test

ISO 1518-1:2019 Paints and varnishes — Determination of scratch resistance — Part 1: Constant-loading method油漆和清漆 耐刮擦性的測定 第1部分：恒定載荷法

耐清潔劑Detergent Resistance

ASTM D2248-01a(2018) Standard Practice for Detergent Resistance of Organic Finishes有機整理劑耐洗滌劑性的標準操作規程

耐化學試劑Resistance of chemical reagents

ASTM D1308-02(2013) Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes家用化學品對透明和有色有機飾面影響的標準測試方法