拉伸強度Tensile Strength

CNS 3553-2016 Method of Test for Tension of Vulcanized Rubber硫化橡膠拉伸試驗法

JIS K6251:2017/Cor.1:2017 (取代JIS K6301:1995) Rubber, vulcanized or thermoplastic-Determination of tensile stress-strain properties硫化橡膠或熱塑性橡膠拉伸應力應變性能的測定

DIN 53504:2017 Determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test橡膠試驗.在抗拉伸試驗中斷裂抗拉強度、屈服拉伸應力、斷裂延伸率和應力值的測定

HG/T 3849-2008(R2017) (取代GB/T 1701-2001) Ebonite.Determination of tensile strength and elongation at break硬質橡膠.拉伸強度和拉斷伸長率的測定

ASTM D2671-13 (電氣用熱收縮管)Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use電氣用熱縮管的標準試驗方法

ASTM D412-16 Method A、B Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension硫化橡膠和熱塑性彈性體的標準試驗方法——張力

ISO 37:2017 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties硫化橡膠或熱塑性橡膠.拉伸應力-應變性能的測定

GB/T 528-2009 Rubber,vulcanized or thermoplastic.Determination of tensile stress-strain properties硫化橡膠或熱塑性橡膠.拉伸應力應變性能的測定

GB/T 30680-2014 第5.3.2節 Fluorine rubber sheet general technical conditions氟橡膠板通用技術條件

GB/T 30308-2013 Fluoroelastomers.General specification and procedure of evaluation 氟橡膠 通用規范和評價方法

AS 1683.11-2001 (橡膠)Methods of test for elastomers - Tension testing of vulcanized or thermoplastic rubber人造橡膠的試驗方法.硫化或熱塑性橡膠的拉伸試驗

伸長率Elongation

ASTM D2671-13 (電氣用熱收縮管)Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use電氣用熱縮管的標準試驗方法

ASTM D412-16 Method A、B Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension硫化橡膠和熱塑性彈性體的標準試驗方法-張力

ISO 37:2017 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties硫化橡膠或熱塑性橡膠.拉伸應力-應變性能的測定

GB/T 528-2009 Rubber,vulcanized or thermoplastic.Determination of tensile stress-strain properties硫化橡膠或熱塑性橡膠.拉伸應力應變性能的測定

CNS 3553-2016 Method of Test for Tension of Vulcanized Rubber硫化橡膠拉伸試驗法

JIS K6251:2017/Cor.1:2017 (取代JIS K6301:1995)Rubber, vulcanized or thermoplastic-Determination of tensile stress-strain properties硫化橡膠或熱塑性橡膠拉伸應力應變性能的測定

DIN 53504:2017 Determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test橡膠試驗.在抗拉伸試驗中斷裂抗拉強度、屈服拉伸應力、斷裂延伸率和應力值的測定

HG/T 3849-2008(R2017) (取代GB/T 1701-2001)Ebonite.Determination of tensile strength and elongation at break硬質橡膠.拉伸強度和拉斷伸長率的測定

AS 1683.11-2001 (橡膠)Methods of test for elastomers - Tension testing of vulcanized or thermoplastic rubber人造橡膠的試驗方法.硫化或熱塑性橡膠的拉伸試驗

壓縮應力-應變性能Compression Stress-Strain

ISO 7743:2017 Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties硫化橡膠或熱塑性橡膠 - 壓縮應力-應變特性的測定

GB/T 7757-2009 Rubber,vulcanized or thermoplastic-Determination of compression stress-strain properties硫化橡膠或熱塑性橡膠.壓縮應力應變性能的測定

JIS K6254: 2017 Section 5 Rubber, vulcanized or thermoplastic-Determination of stress-strain properties硫化橡膠或熱塑性橡膠應力應變性能的測定

壓縮性能Compression properties

ASTM D575-91(2018) Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades鋼筋、碳、商戶質量、M 級的標準規范

壓縮應力松弛Stress Relaxation in Compression

ISO 3384-1:2011 Method A Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 1: Testing at constant temperature (ISO 3384-1:2011 + Amd.1:2013) 硫化橡膠或熱塑性橡膠-壓縮應力松弛的測定-第1部分：恒溫測試

GB/T 1685-2008 方法A Rubber,vulcanized or thermoplastic.Determination of stress relaxation in compression at ambient and at elevated temperatures硫化橡膠或熱塑性橡膠.在常溫和高溫下壓縮應力松弛的測定

ASTM D6147-97(2014) Method A Test Method for Vulcanized Rubber and Thermoplastic Elastomer-Determination of Force Decay (Stress Relaxation) in Compression硫化橡膠和熱塑性彈性體的試驗方法-壓縮力衰減(應力松弛)的測定

拉伸永久變形Tensile set

ISO 2285:2019 Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load 硫化橡膠或熱塑性橡膠-恒定伸長率下張力變形和恒定拉伸載荷下張力變形、伸長率和蠕變的測定

蠕變測試Creeping test

GB/T 19242-2003 (硫化橡膠)Rubber,vulcanized--Determination of creep in compression or shear硫化橡膠 在壓縮或剪切狀態下蠕變的測定

回彈性Rebound Resilience

ISO 4662:2017 Pendulum Method Rubber, vulcanized or thermoplastic - Determination of rebound resilience硫化橡膠或熱塑性橡膠?；貜椥缘臏y定

GB/T 1681-2009 Rubber.Determination of rebound resilience of vulcanizates硫化橡膠回彈性的測定

DIN 53512:2000 Determination the rebound resilience of rubber using the Schob pendulum用 Schob 擺錘測定橡膠的回彈性

JIS K6255:2013 Rubber, vulcanized or thermoplastic - Determination of rebound resilience硫化橡膠或熱塑性橡膠?；貜椥缘臏y定

撕裂強度Tearing strength

GB/T 529-2008 Rubber,vulcanized or thermoplastic.Determination of tear strength(Trouser,angle and crescent test pieces)硫化橡膠或熱塑性橡膠撕裂強度的測定(褲形、直角形和新月形試樣)

JIS K6252-1:2015 Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces硫化橡膠或熱塑性橡膠-撕裂強度的測定-第1部分：褲子、角鋼和月牙試件

JIS K6252-2:2015 Rubber, vulcanized or thermoplastic - Determination of tear strength

ISO 34-2:2015 (Delft specimen) Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 2: Small (Delft) test pieces硫化或熱塑性橡膠-撕裂強度的測定-第2部分：小(德?tīng)柗蛱?試樣

ASTM D624-00(2012) Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers常規硫化橡膠和熱塑性彈性體撕裂強度的標準試驗方法

ISO 34-1:2015 Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces 硫化橡膠或熱塑性橡膠-撕裂強度的測定-第1部分：褲子、角鋼和新月形試樣

GB/T 12829-2006 (德?tīng)柗蛱卦嚇?Rubber, vulcanized or thermoplastic. Determination of tear strength of small test pieces (Delft test pieces)硫化橡膠或熱塑性橡膠小試樣 (德?tīng)柗蛱卦嚇?撕裂強度的測定

抗剪切強度Shearing strenth

GB/T1700-2001 (作廢)(硬質橡膠)Ebonite-Determination of shearing strength硫化橡膠或熱塑性橡膠-撕裂強度的測定

壓縮永久變形Compression Set

ASTM D395-18 Method A Standard Test Methods for Rubber Property—Compression Set橡膠性能的標準測試方法-壓縮永久變形

ASTM D395-18 Method B Standard Test Methods for Rubber Property—Compression Set橡膠性能的標準測試方法-壓縮永久變形

ISO 815-1:2019 Rubber, Vulcanized or Thermoplastic - Determination of Compression Set at Ambient, Elevated or Low Temperatures硫化橡膠或熱塑性橡膠 - 環境溫度、高溫或低溫下壓縮永久變形的測定

JIS K6262:2013 Section 6 Rubber, vulcanized or thermoplastic - Determination of compression set at ambient, elevated or low temperatures硫化橡膠或熱塑性橡膠 - 環境溫度、高溫或低溫下壓縮永久變形的測定

DIN ISO 815-1: 2016 (取代DIN 53517:1987)Rubber, Vulcanized or Thermoplastic - Determination of Compression Set at Ambient, Elevated or Low Temperatures硫化橡膠或熱塑性橡膠 - 環境溫度、高溫或低溫下壓縮永久變形的測定

JIS K6403:2018 Classification system for vulcanized rubber for automotive applications汽車用硫化橡膠分類系統

GB/T 7759.1-2015 Rubber, vulcanized or thermoplastic.Determination of compression set.Part 1:At ambient or elevated temperatures 硫化橡膠或熱塑性橡膠 壓縮永久變形的測定 第1部分:在常溫及高溫條件下

GB/T 30308-2013 Fluoroelastomers.General specification and procedure of evaluation

ASTM D1414-15 Section 10(橡膠O型圈)(IDT ASTM D395-2018 Method B)Standard Test Methods for Rubber O-Rings橡膠 O 型圈的標準測試方法

GB/T 1683 -2018 Acoustics - Preferred reference values for acoustical and vibratory levels聲學-聲學和振動水平的首選參考值

HG/T 2876-2009(R2017) (橡塑鞋微孔材料)Cellular material for rubber-plastics shoes.Determination of compression set本標準規定了橡塑鞋微孔材料壓縮變形的試驗方法。 本標準適用于橡塑鞋微孔材料壓縮變形的測定。

低溫壓縮永久變形Compression Set at Low Temperature

ISO 815-2:2019 Rubber, Vulcanized or Thermoplastic - Determination of Compression Set at Ambient, Elevated or Low Temperatures硫化橡膠或熱塑性橡膠 - 環境溫度、高溫或低溫下壓縮永久變形的測定

GB/T 7759.2-2014 Rubber, vulcanized or thermoplastic.Determination of compression set.Part 2:At low temperatures硫化橡膠或熱塑性橡膠 壓縮永久變形的測定 第2部分:在低溫條件下

JIS K6262:2013 Section 7 Rubber, vulcanized or thermoplastic - Determination of compression set at ambient, elevated or low temperatures硫化橡膠或熱塑性橡膠-環境溫度、高溫或低溫下壓縮永久變形的測定

硬度(ASKER C型)Hardness(ASKER C)

ISO 48-4:2018 (取代ISO 7619-1:2010 )Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)硫化或熱塑性橡膠-硬度測定-第4部分：硬度計法的壓痕硬度(邵爾硬度)

JIS K7312:1996 (熱固性聚氨酯彈性體) Physical Testing Methods for Molded Products of Thermosetting Polyurethane Elastomers熱固性聚氨酯彈性體模制品的物理試驗方法

邵氏A型硬度Shore Hardness Type A

GB/T 531.1-2008 Rubber,vulcanized or thermoplastic.Determination of indentation hardness.Part 1:Duromerer method( Shore hardness)硫化橡膠或熱塑性橡膠.壓入硬度試驗方法.第1部分:邵氏硬度計法(邵爾硬度)

JIS K7312:1996 (熱固性聚氨酯彈性體) Physical Testing Methods for Molded Products of Thermosetting Polyurethane Elastomers熱固性聚氨酯彈性體模制品的物理試驗方法

JIS K6253-3:2012 Rubber, vulcanized or thermoplastic-Determination of hardness- Part 3: Durometer method硫化橡膠或熱塑性橡膠硬度的測定第3部分：硬度計法

ISO 868:2003 Plastics and Ebonite - Determination of Indentation Hardness by Means of a Durometer (Shore Hardness)塑料和硬橡膠-用硬度計測定壓痕硬度(邵爾硬度)

ASTM D2240-15 Standard Test Method for Rubber Property-Durometer Hardness 橡膠性能的標準試驗方法-硬度計的硬度

ISO 48-4:2018 (取代ISO 7619-1:2010 ) Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)硫化或熱塑性橡膠-硬度測定-第4部分：硬度計法的壓痕硬度(邵爾硬度)

GB/T 2411-2008 Plastics and ebonite.Determination of indentation hardness by means of a durometer(shore hardness)塑料和硬橡膠.使用硬度計測定壓痕硬度(邵氏硬度)

DIN ISO 7619-1:2012 (取代DIN 53505:2000) Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness) (ISO 7619-1:2010)硫化或熱塑性橡膠-壓痕硬度的測定-第1部分：硬度計法(肖氏硬度)

AS 1683.15.2-1990 (橡膠) Methods of test for elastomers - Durometer hardness人造橡膠的測試方法 硬度計法

國際橡膠硬度International Rubber Hardness Degrees(IRHD)

ASTM D1415-18 Standard Test Method for Rubber Property—International Hardness橡膠性能的標準試驗方法-國際硬度

ISO 48-2:2018 (取代ISO 7619-1:2010 )Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)硫化或熱塑性橡膠-硬度測定-第4部分：硬度計法的壓痕硬度(邵爾硬度)

GB/T 6031-2017 Rubber, vulcanized or thermoplastic—Determination of hardness (hardness between 10 IRHD and 100 IRHD)硫化橡膠或熱塑性橡膠 硬度的測定(10IRHD~100IRHD)

JIS K6253-2:2012 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 2: IRHD method (hardness between 10 IRHD and 100 IRHD)硫化橡膠或熱塑性橡膠-硬度測定-第2部分：IRHD方法(硬度在 10 IRHD 和 100 IRHD 之間)

BS ISO 48:2010 (作廢) (取代 BS 903-A26:1995)Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)硫化或熱塑性橡膠-硬度測定-第4部分：硬度計法的壓痕硬度(邵爾硬度)

耐化學溶劑Resistance to liquids

ASTM D471-16a (浸泡法) Standard Test Method for Rubber Property-Effect of Liquids橡膠性能的標準試驗方法-液體的影響

ISO 1817:2015 (浸泡法) Rubber, vulcanized or thermoplastic - Determination of the effect of liquids硫化橡膠或熱塑性橡膠-液體影響的測定

GB/T 30308-2013 Standard Practices for Sampling for Particles in Aerospace Fluids and Components航空流體和部件中顆粒取樣的標準做法

GB/T 30680-2014 第5.3.4節Fluorine rubber sheet general technical conditions氟橡膠板通用技術條件

GB/T 1690-2010 (浸泡法)Rubber,vulcanized or thermoplastic.Determination of the effect of liquids硫化橡膠或熱塑性橡膠 耐液體試驗方法

熱空氣老化(試管法)Deterioration by Heating in Air (Test Tube Enclosure)

ASTM D865-11(2018) Standard Test Method for Rubber Deterioration by Heating in Air (Test Tube Enclosure)空氣中加熱導致橡膠劣化的標準試驗方法(試管外殼)

水解穩定性Hydrolytic Stability

ISO 4646:1989 (多試樣法)Rubber- or Plastics-Coated Fabrics - Low-Temperature Impact Test橡膠或塑料涂層織物-低溫沖擊試驗

D42 1115:1997 (無脆性極限溫度) Specification for Coal-Tar Pitch for Roofing, Damp-Proofing and Waterproof IG Level屋頂、防潮和防水等級用煤焦油瀝青規范

ASTM D3137-81 (2018)低溫脆化溫度Brittleness temperature. Standard Test Method for Rubber Property—Hydrolytic Stability橡膠性能的標準試驗方法——水解穩定性

ASTM D2137-11(2018) (多試樣法)Method A、C、D. Standard Test Methods for Rubber Property Brittleness Point of Flexible Polymers and Coated Fabrics柔性聚合物和涂層織物的橡膠性能脆點的標準試驗方法

ISO 812:2017 (多試樣法)Procedure A、B、C. Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness硫化橡膠或熱塑性橡膠-低溫脆性的測定

GB/T 15256-2014 (多試樣法)程序A、B、C. Rubber, vulcanized or thermoplastic.Determination of low-temperature brittleness(multiple test piece method)硫化橡膠或熱塑性橡膠 低溫脆性的測定(多試樣法)

GB/T 30308-2013 Fluoroelastomers.General specification and procedure of evaluation 氟橡膠 通用規范和評價方法

GB/T 1682-2014 (單試樣法)Rubber,vulcanized.Determination of low-temperature brittleness.Single test piece method硫化橡膠 低溫脆性的測定 單試樣法

JIS K6261:2006 clause 5(多試樣法) Rubber, Vulcanized or Thermoplastic - Determination of Low Temperature Properties硫化橡膠或熱塑性橡膠 - 低溫性能的測定

橡膠低溫回縮(TR測試)Low-temperature Retraction (TR Test)

ASTM D1329-16 Standard Test Method for Evaluating Rubber Propert-Retraction at Lower Temperatures (TR Test)評價橡膠性能的標準試驗方法-低溫回縮(TR試驗)

ISO 2921:2019 Rubber, vulcanized-Determination of low-temperature characteristics-Temperature-retraction procedure (TR test)硫化橡膠-低溫特性的測定溫度回縮程序(TR 試驗)

GB/T 7758-2002 Rubber,vulcanized-Determination of low-temperature characteristics-Temperature-retraction procedure (TR test)硫化橡膠 低溫性能的測定 溫度回縮法(TR試驗)

JIS K6261:2006 Section 7 Rubber, Vulcanized or Thermoplastic - Determination of Low Temperature Properties硫化橡膠或熱塑性橡膠 - 低溫性能的測定

表面污染性Staining of surfaces

ASTM D925-14 Method A Standard Test Methods for Rubber Property—Staining of Surfaces (Contact, Migration, and Diffusion)橡膠性能的標準測試方法-表面染色(接觸、遷移和擴散)硫化橡膠或熱塑性橡膠-與有機材料接觸的染色試驗方法

ISO 3865:2020 Method A Rubber, vulcanized or thermoplastic -Methods of test for staining in contact with organic material硫化橡膠或熱塑性橡膠-與有機材料接觸的染色試驗方法

GB/T 19243-2003 方法 A1 Rubber,vulcanized or thermoplastic--Methods of test for staining in contact with organic material硫化橡膠或熱塑性橡膠與有機物接觸污染的試驗方法

DIN磨損DIN abrasion

DIN ISO 4649:2014 (取代DIN 53516:1987) Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device硫化橡膠或熱塑性橡膠 - 使用旋轉圓柱形滾筒裝置測定耐磨性

ISO 4649:2017 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device 硫化橡膠或熱塑性橡膠 - 使用旋轉圓柱形滾筒裝置測定耐磨性

GB/T 9867-2008 Rubber,vulcanized or thermoplastic.Determination of abrasion resistance using a rotating cylindrical drum device硫化橡膠或熱塑性橡膠耐磨性能的測定(旋轉輥筒式磨耗機法)

SATRA PM174:1994 Abrasion resistance-rotating drum method耐磨性-轉鼓法

BS ISO 4649:2017 (取代BS 903-A9:1988 ) Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device硫化橡膠或熱塑性橡膠 - 使用旋轉圓柱形滾筒裝置測定耐磨性

EN 13597:2003 Section 7.2.5 (IDT ISO 4649-2017) Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs鐵路應用-橡膠懸掛部件-用于氣動懸掛彈簧的橡膠膜片

ASTM D5963-04 (2015)Method A、Method B(橡膠)Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)橡膠性能的標準試驗方法-耐磨性(轉鼓研磨機)

阿克隆磨耗Akron abrasion test

GB/T 1689-2014 Rubber vulcanized.Determination of abrasion resistance (Akron machine)硫化橡膠 耐磨性能的測定(用阿克隆磨耗試驗機)

尺寸測試Measurement of dimensions

ASTM D3767?03 (2014)(橡膠) Standard Practice for Rubber—Measurement of Dimensions橡膠標準規程——尺寸測量

熱充電Heat Shock

ASTM D2671-13 C26-30(電氣用熱收縮管)Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use電氣用熱縮管的標準試驗方法

塑性值/復原值Plasticty Number/Recovery Number

GB/T 12828-2006 Rubber, raw and unvalcanized compounded Determination of plasticity number and recovery number Parallel plate method生膠和未硫化混煉膠塑性值和復原值的測定平行板法

ISO 7323:2006 Rubber, raw and unvulcanized compounded Determination of plasticity number and recovery number Parallel-plate method橡膠，生的和未硫化的混煉膠 塑性數和恢復數的測定 平行板法

密度Density

ASTM D297-15 (Hydrostatic Method) Standard Test Methods for Rubber Products-Chemical Analysis橡膠制品的標準試驗方法-化學分析

ISO 2781:2018 (Method A) Rubber, vulcanized or thermoplastic - Determination of density硫化橡膠或熱塑性橡膠.密度的測定

GB/T 533-2008 方法A Rubber,vulcanized or thermoplastic.Determination of density硫化橡膠或熱塑性橡膠.密度的測定

GB/T 30308-2013 Fluoroelastomers.General specification and procedure of evaluation氟橡膠 通用規范和評價方法

CNS 5341-2007 方法Ⅰ Determination of density for vulcanized or thermoplastic rubber硫化橡膠或熱塑性橡膠密度測定法

JIS K6268:1998 (Method A) Rubber, Vulcanized - Determination of Density

硫化橡膠 - 密度測定

DIN 28090-2:1995 Section 8(墊圈材料) Static gaskets for flange connections - Gaskets made from sheets - Part 2: Special test procedures for quality assurance法蘭連接件的靜態密封墊.板材制密封墊.第2部分:質量保證的特殊試驗程序

視密度Apparent density

HG/T 2872-2009(R2017)(橡塑鞋微孔材料) Cellular material for rubber-plastics shoes.Determination of apparent density橡塑鞋微孔材料視密度試驗方法

90o剝離試驗90°Stripping Test

ASTM D429-14 Method B Standard Test Methods for Rubber Property-Adhesion to Rigid Substrates橡膠性能的標準試驗方法-對剛性基材的附著力

GB/T 7760-2003 Rubber,vulcanized or thermoplastic--Determination of adhesion to a rigid substrate--90 degrees peel method硫化橡膠或熱塑性橡膠與硬質板材粘合強度的測定 90°剝離法

各層間粘結強度Adhesion between components

ISO 8033: 2016 (壓縮空氣用織物增強橡膠軟管) Rubber and plastics hoses - Determination of adhesion between components橡膠和塑料軟管。部件間附著力的測定

GB/T 14905-2009 (壓縮空氣用織物增強橡膠軟管) Rubber and plastics hoses.Determination of adhesion between components橡膠和塑料軟管.各層間粘合強度的測定

粘接強度Adhesion strength

ASTM D413?98 (2017)Machine Method(橡膠) Standard Test Methods for Rubber Property-Adhesion to Flexible Substrate橡膠性能的標準試驗方法-對柔性基材的附著力

抗粘性Blocking resistance

ISO 5978: 1990 (橡膠或塑料涂層織物)Rubber- or Plastics-Coated Fabrics - Determination of Blocking Resistance橡膠或塑料涂層織物，抗粘連性的測定

耐磨Abrasion resistanceEN

ISO 6945: 1996 (橡膠軟管)(廢止) Rubber hoses－Determination of abrasion resistance of the outer cover橡膠軟管外罩耐磨性的測定

90o剝離試驗90 stripping test

ISO 813:2019 Rubber, vulcanized or thermoplastic-Determination of adhesion to a rigid substrate -90° peel method硫化橡膠或熱塑性橡膠-對剛性基材的附著力測定-90°剝離法

拉伸剪切強度Tensile shear strength

GB/T 13936-2014 Rubber, vulcanized.Method for determination of strength properties of adhesive to metal in shear by tension loading硫化橡膠 與金屬粘接拉伸剪切強度測定方法

低溫柔韌性L(fǎng)ow-Temperature Properties

ASTM D2671-13 C36-43方法A/B/C(電氣用熱收縮管)Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use電氣用熱縮管的標準試驗方法

低溫曲撓實驗Subambient temperature flexibility tests

GB/T 5565.2-2017 (橡膠軟管)Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 2: Bending tests at sub-ambient temperatures橡膠和塑料軟管和管材柔韌性和剛度的測量第2部分：亞環境溫度下的彎曲試驗

EN ISO 10619-2:2018 方法B(橡膠軟管)(取代EN ISO 4672: 1999) Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures橡膠和塑料軟管和管材，柔韌性和剛度的測量，第2部分：低于環境溫度的彎曲試驗

溶脹指數Swellling index

HG 3870-2008 (R2017)(硫化橡膠) Rubber, vulcanized.Determination method of swelling index硫化橡膠溶脹指數測定方法